Showing posts with label Metal working. Show all posts
Showing posts with label Metal working. Show all posts

Tuesday, June 14, 2016

My book case - Non-IT

Ok, this post documents most of the remaining books on the book shelves.  The content mainly covers Christianity, Home/Repair, Metal working, Gardening, Mat and Science.

Here is a link to my previous post covering my IT related books.

I'm not going to document all the magazines and the remaining books - a combination of family "fun reads", cook books and other miscellany.


Here is my bible (I find the "New American Standard Bible" pretty easy to read) and a few other books we have.  One nice thing about God is that God doesn't need to change - one book tells it all. Oh, we do have other books because I like to understand historical context, etc at times as well.  For better or worse, I don't think I could ever consider myself a bible scholar though.  I find myself having to read a lot more IT technical books to keep up with the changing times.


Here are other Christianity related books on the other side of the bookcase. Most of these are my wife's.

I had a brief plan to do a bit of a career change from general IT into Bioinformatics but decided that the combination of a time consuming primary job along with the need to spend quality time with my family outweighed my desire for change.  On a different note, when studying material like this I find it hard *not to see* God's handiwork. 


For as many barn/shed books as I ended up with (cleaned out my fathers stash when they moved a while back... I couldn't say no), I should have built the workshop I planned.  Maybe after we get moved.. I found most of the deck books either had overly fancy projects or didn't really meet current construction codes - googling for stuff kept me code compliant but you still have to double check things.  The books on electricity and concrete work helped me out with a couple projects.




Here are a bunch of my "hobby" books.  I will say that I am hugely impressed with how much raw data is crammed into the "Machinery's Handbook" - it is purely a reference but helpful too in a sort of "find what you don't know" kind of way.  At some point, I would still love to build a CNC router and maybe work with some milling, cutting, plasma cutting type tools.


 Most of these math books are related to my math minor.  The more "business statistics" related books are my wife's.  On a rare occasion I pull one of these out because I want to remember how to solve some problem or another.  I had hoped my son might read these a little bit (he does like math) but these just don't have the draw of his fun reading or drawing activities.

 The physics are from my undergrad degree and the others are actually text books I got from my dad when they moved.  The old books are dated technology wise but still have some interesting things here and there.  It is kind of interesting to see the difference in writing styles between ~1960's text books and technical writing today.  The old text books are a bit dry in style but I have to wonder if the "easier reading style" nowadays isn't required because everyones attention span is so low. I did laugh at some article indicating that the average adult has around an 8 second attention span while a gold fish has a 9 second attention span.

Here is the last of the stuff I care to document. phew.  I do like gardening and hope I will still again have time to do some once I find an appropriate job and relocate as desired.

I hope you find something enjoyable out of all this.  Thanks for reading!
Scott

Proverbs 18:15
15 The heart of the discerning acquires knowledge, for the ears of the wise seek it out.

Saturday, October 4, 2014

Hobby Metal working on a budget and lessons learned - conclusion

In my previous post, I talked about some useful tools and a project where I tried out my Harbor Freight bench top drill.  In this post, I am simply going list out what I think is a useful progression of tools and some of the reasoning/needs.  I originally had a goal of producing a post with a spreadsheet which could help in determining a rough tooling cost but that  turned out to be too complex.  There are too many variations in needs to do what I wanted.  Someone who just wants to some arc welding can probably get by with < $1000 in equipment; maybe a touch less if you find deals/used items.  Someone wanting to welding + precision metal working on larger projects might be looking at $10,000-$50,000 in equipment depending on the details (but still talking about hobby scale).

Some of this is based on my own limited experience.  Some is based on research I did on various manufacturers, suppliers, youtube videos and numerous blogs.  I also have a few books which have been extremely helpful.
  • Machine Shop Essentials - Questions & Answers
    • Second Edition, Frank Marlow, PE
  • Welding Essentials - Questions & Answers
    • Expanded first-edition, William Galvery, Frank Marlow
  • Welding Know-How - Tips & Techniques of Master Welders
    • Frank Marlow, PE with P.J. Tallman
I highly recommend those books, especially if you are new to welding or metal working.  Overall there is a huge amount of great content.  You will find some parts that are pretty much shared as-is between the books - mainly between the welding books and a lesser extent with the machine shop book.  There is still interesting and/or useful content in each book.  I also think that there are a few mistakes in the books but I have not gone to check and see if there was existing errata covering the items I found. The writing is generally pretty clear.  There are a few items I wish could be expressed in more detail to make sure I truly understand.  If I had to pick the top 2 books it would be the first and last in my list.

Regarding this post, one observation I want to make is that some tools usefulness is dependent upon the types of projects you intend to work on.  It very hard to make general recommendations due to the number and/or type of variables involved - things from user skill/training, material differences, availability of supporting materials/parts, storage/usage space, portability, etc.  I am trying to focus on a more hobbyist view but I admit that several items listed are very unlikely to be found in a hobbyist workshop.

My relative cost info is very rough.  Since many of these technologies/items I don't own, it is harder to provide accurate estimates without lots of extra research.  I am saying these are best guesses / educated guesses depending. Feel free to disagree or disregard; I'm sure many folks have much more experience with most of the items.
  • Items in green I use now - a general progression once I bought a welder and likely what many others start out with.
  • Items in orange I am evaluating with the hope of picking one as being the most useful.
  • Items in yellow I deem highly usable but due to cost need to save up for. I may have a specific vendor/model in mind - will comment if known.
  • Items in purple are on a wish list but likely unobtainable unless I can move from hobby to business. 
Another useful list with a small business slant:starting a metal working business
Cutting action




Saw/slice Abrasive Non/low-contact Initial cost Ongoing cost Cut Quality (general use) Best Use Notes
Hacksaw

$ $ low/medium Small finishing cuts, parting off, straight line Get a good arm workout
Metal snips

$ $ low Getting forearm workout Maybe ok for some short/easy cuts but I found much to dislike otherwise

3" High Speed Cut-Off Tool (pneumatic)
$ $$ low Non-cosmetic cuts, not overly thick; ok on flat stock Need decent air compressor.  I tend to destroy blades with under-supported work (pinching).

4 ½ angle grinder
$ $$ low non-cosmetic cuts, not overly thick; ok on flat stock I tend to destroy blades with under-supported work (pinching).

14” abrasive chop saw
$$ $$ low/medium straight/small miter cuts on bar/tube/angle
Electric shear

$ $ low ~18+ gauge sheet metal Tons better than snips. Variety of vendors/capability/cost
Jig saw

$$ $ low/medium flat material was ok; must be WELL secured. I found thick angle iron painful to cut this way. Make sure you are not setup with any type orbital action.
Metal cutting circular saw

$$$ $$ low/medium plate/sheet, relatively straight
Dry cut saw

$$$ $$ medium straight cuts;bar /tube /angle user skill and maybe other factors appear to play a good sized part in how well this works.
Metal cutting band saw

$$$ $ medium General use, small curves possible depending on material/thickness/saw style/blade type-size Larger foot print is a downside.  Vertical/horizontal or combo models available.


wet SMAW rods or specialized rods $ $ very poor making ugly holes/cuts emergency use


Oxygen lance/burning bar ? ? poor very thick materials burning bar can penetrate concrete; high oxygen consumption


Air Carbon Arc cutting $$ $$ low sever items; great for gouging Need decent air compressor


Oxygen / Acetylene cutting torch $$$ $$ medium Best above a minimum thickness; curves/shapes fairly simple; can cut very thick material Not for aluminum/stainless steel; completely portable


Plasma Cutter $$$$ $ medium/high Hand held < ~1.5” or so;easy curves/shapes Any electrically conductive metal/material; need a decent air compressor.  Need very dry air supply.


Wire EDM $$$$$ $$$ very high higher end, professional detailed cuts/shaping It is possible that this can be done at a hobby level but would take some decent skills to build.


Water jet $$$$$$ $$$$ very high higher end, professional detailed cuts/shaping The high pressures make this pretty infeasible for hobby use

















Regarding an abrasive cutoff saw, dry cut saw and band saw; I am torn on that mainly due to space.  I think a band saw would provide the most flexibility but I am running out of space fast. I have a couple other items which I would love to acquire at some point which may require the remaining space so I am just letting the decision sit for now (& save for plasma cutter).  Maybe I will find a job which will provide the spare cash for a larger garage :)  Or maybe some folks will want to put some money together for a shared off-site workshop;  maybe start something like this TechShop.

Regarding a plasma cutter; I have been considering both the Thermal Dynamics Cutmaster 42 and the Hypertherm Powermax 30xp.  It is a hard decision from the cost differential.  There is a large amount of pro-Hypertherm user reviews out there and it seems like they have their act together (Jim Colt from Hypertherm posts lots of very useful info in various forums).  From a hobbyist perspective though, is the initial cost differential worth the longer consumable life (it seems) and maybe a bit better support?  I'm certain that the commercial users get great support from Hypertherm but I am less certain from a hobbyist perspective of the support differences - I don't expect them to show up in my garage to help me figure out some need/problem I have.  At the same time, I do know that Hypertherm is made in USA.  I have seen numerous folks comment on finding a used item but at the same time - people indicate that many good quality used items retain their value so you pay near retail but may not have any warranty available.  Tough decision and I don't know anyone with units so that I can determine what is best for me.  Additionally, I am still in the "experimenting" stage so "best for me" is not easily defined (if at all) - I know I want to clean cut 1/4" mild steel and maybe stainless and aluminum - but not sure how much thicker I would go (probably not much..).

[Update] Ok, as I review the Powermax 30xp further, I lean more toward it.  There seem to be reports of repeatable good consumable lifetimes and few problems.  I don't see as many reports on the TD equipment.  I will have to see what my local welding supply places sell - I would like to know there is a local repair option for some of the more expensive equipment.  If I ever build a CNC plasma table, it sounds like I could still use the Powermax 30xp (just no machine torch and capacity pretty low for CNC work).

Here are the hole making and forming type items.
Item Notes My take Cost
Hand held drill Pretty much a standard for anyone doing any type of home/hobby work. Different size chuck and styles; corded/cordless options as well. Better for thin or softer material. Consider more of a given than a requirement. Complements a drill press. $
Drill Press fast/flexible setup; fast turn-around; relatively small foot print To get nice plumb holes, a good quality drill press really comes in handy. I just got a 50-60 year old drill press from my father and the quality is much higher than a Harbor freight version. Craigslist is your friend – reasonable deals can be found. $-$$
Hydraulic press Bending, pressing. Various extras allow creating box pans and such. Some cross over with an Iron worker but is generally more of a complement. Presses can be found at reasonable prices on craigslist sometimes; quality, capability and features can vary significantly. Tooling may add a lot to total cost depending on what you are doing. Could use for ornamental art, vehicle maint, help with creating drawers and carts, etc. I'd recommend 20-50 ton capacity. $-$$
Milling machine Ability to do more than just make holes (compared to to drill press). Groove/slot and larger cuts. Slower setup and turn-around. Complements a lathes functions. A vertical knee type Bridgeport clone is likely the most flexible machine you can choose. Many options; DRO, power down feed, power axis, full CNC. I would enjoy a Lagun but I think I have a better chance of finding an affordable Sharp or Wells-Index. There are a number of other good brands but these are the ones which seem to be a good value and seem somewhat common. Tooling is a very large cost to account for and should not be underestimated. $$$
Metal Lathe Turning, threading, complements a mills functions. I don't really have any particular need for a metal lathe at this time. It would likely take a larger/longe item to push me to need a lathe. $$$
Iron Worker shear, press, punch, notch, bend. Typically flats, angle, rounds, tubing. For some operations, this is much faster than using a drill press or mill. Part of me would really like to get an iron worker. I can envision using it to work with ornamental art and lot of other things. The cost and size are a deterrent though. $$$

Here is a quick list of lots of useful "little" stuff - lots of it depends on what you are doing.  Low precision (maybe metal artwork) versus high precision (such as engine parts) makes a large difference in selecting items.  Browse an online site like use-enco to see a huge selection of items available.
Cleaning Coating Hammers Work Holding /control Measuring /alignment Punch/ marking Holes /threading Misc
Sand paper Foam brushes Welding C-clamps Tape measures Center punches Tap and die set Extra Lighting
Acetone Paint brushes Ball pein Bar clamps Calipers Transfer punches 135 degree drill bits; HSS/ Cobalt /etc 120v & 220/240v 1 phase outlets
Mineral spirits Spray cans Standard Spring clamps Micrometers Pin punches
Extension cords
Files HVLP sprayers Mini-sledge 4+” vice Wiggler tool Cold chisels
Storage carts
Dremel w/burrs

Vise grips DTI's Layout fluid
tool boxes
Die grinder

Angle clamps sine bar Soap stone
cutting fluid
Angle grinder w/variety of wheels – dedicated purposes

Toggle clamps Machinist square Markers
safety equipment
6” Grinder

Work tables Height gauge

screw drivers
Belt Sander

Angle plates Feeler gauge

wrenches
Sandblaster

Parallels Gauge blocks

metal snips
Parts washer

Saw horses Thread gauge


Cleanup magnet


Straight edges






1-2-3 blocks






Rotary table



This is really just a very short survey of stuff related to welding/machining. I really enjoy working with this type of stuff but it is a major black hole for $.  Definitely need to set limits.  There are many days I wish I could find work that combined my software development skills with metal working skills.  Can keep wishing but won't hold my breath - for now this makes a nice stress reliever from the existing day job.

Hoping someone find something helpful or entertaining in all this.

Wishing you a blessed day.
Scott

Monday, May 12, 2014

Hobby Metal working on a budget and lessons learned - part 1

I am looking to broaden my skills for a couple reasons:
  • Hoping that a new hobby will provide relaxation and help reduce day job stress.
  • Desire to gain skills which I hope to combine someday in a career change and/or post retirement money maker in the longer term.
In pursuit of this; I started with learning to weld.  This is one item which I didn't skimp after doing lots of research.  I started with a Thermal Dynamics welder and am enjoying it a lot.

There turned out to be a number of side effects to this though.  Some were expected and others less so.  Some of the expected effects are the need for safety related items like a welding jacket, gloves, helmet and such.  Some partially expected effects are the need for a wide variety of clamps, clamp/magnet devices along with wire brushes.

Since I am working with mild steel mostly, I noted a need to keep my work area clean so you end up with a magnetic sweeper and other magnetic pickups.

If you want to work with sheet metal; it only takes a very small project to decide that metal snips are tiring so you pickup electric metal cutting shears/snips.

I am still working with flux core wire only for now and that means pretty big messes with slag and such.  Also, since I am still learning, there tend to be mistakes which must be fixed so it doesn't take long to find a need for an angle grinder.  There is a big need for wire wheel, cut-off and grinder blades to go along with that.

You decide pretty early on to make your own welding cart and.. you find that you need all kinds of things. You try some things that work ok but you recognize that many of those are not what you want to do long term..
  • Starting with hacksaw
  • Trying out the jig saw with some metal cutting blades
  • abrasive blades for the 3" pneumatic cutt-off tool
  • Angle grinder with cut-off blades
  • And then start eying up metal cutting circular saws, chop saws, iron workers, plasma cutters, metal cutting band saws, etc.  Plasma cutters need a dry source of air and then there are tools which are more common in 208-240V 1 phase or the more industrial 3 phase power.  So you find some nice equipment using 3 phase power and end up with a static phase converter..
Of course, most of the above items are related to cutting only but then you realize the need to make holes.  You may be working with a corded/cordless hand drill initially but you recognize that it is tiring and somewhat difficult to make very many holes in much more than thin sheet metal.

I didn't have a drill press of any sort so I searched around but couldn't make up my mind in regards to a nicer used drill press.  I ended up with a Harbor Freight 12 speed Bench drill press.  It can make holes but don't expect something other than pretty low quality.  The table and base are now stamped steel, the table height adjustment wobbles severely at best and the spindle/chuck has plenty of runout.

One project I am working on is an adapter to attach the Craftsman furrow blade (intended for my tiller) onto the sleeve hitch on my garden tractor.  Not expecting much from this; somewhat an experiment.  It is providing a good learning opportunity and test of the drill press.  Of course, a drill press without bits isn't much use and in this case I needed something in the 5/8" size to handle the pin attachment on the hitch.  Since I didn't have anything that large I ended up buying the Silver and Demming 8 pc drill bit set from Harbor freight.  As others state in reviews of those bits; the box is pretty much trash but the bits work pretty well.  I am running the drill press at the lowest speed (300rpm) and using some tapping oil at the moment.  Based on feed and speeds from "Machine Shop Basics; by Audel", I could go to a higher RPM.  I am inclined to keep it lower for now until I get more comfortable with with the drill press.

Some surprising (or not) initial finding related to the drill press are;
  • Quill travel on it is pretty low
  • max spindle to table travel is low and with large bits it becomes VERY noticeable 
For my above furrow adapter, the sleeve hitch attachment is only about 4" tall and when combined with the large bits there is not enough room.  Fortunately, I only needed 1/8" of extra clearance for which raising the head of the drill press just a touch worked.  I would not normally do that and if I had needed any more clearance than that; I would have looked for a different way.  I initially thought of simply removing the table but then I would need to build a (short) platform since there isn't enough quill travel to make up that extra distance.  I think what I will end up doing is watch for a reasonably nice but low profile mill/drill vice.  I think this attached to the slots on the drill press base may give me a working alternative but I will likely be going back/forth with attaching the table for the height adjustment.  Long term I would like to justify either a mill/drill press combo or a full mill of reasonable size.

Next on the lessons learned was; how do I immobilize the work during drilling?  I came up with a reasonable solution which included 2 small "super strut" angle brackets bolted to the table slots with part of the work under the edges of those and then a bolt between the 2 angle brackets which took up slack and helped keep things from shifting.  Again, a mill/drill vise may be in my future.

It was "interesting" trying to properly locate the top and bottom holes for the sleeve hitch pin.  I was able to just "pick a spot" on the bottom plate which is where I started. Since the pin needs to go through a piece of tube on the tractor side though, I knew I had to be somewhat accurate with the hole on the far side.  I bounce around a few ideas and was debating about just using the tape measure but since this part had already been welded; it would be slightly harder to do with a tape measure.  What I finally decided on (and which worked) was to dip the tip of the pin (which has a flat tip) in paint and run it up from the bottom against the top plate.  That gave me a fairly accurate point of reference from which I was able to measure and transfer the location from the underside to the topside where I was able to align the bit with it.  I successful in test fitting the plate on the sleeve.  I still have more parts to weld up but I think the hard parts are now complete.

I again am impressed by the ingenuity other folks demonstrated to successfully create jigs and other types of items to successfully hold work in useful ways.

Anyways, it is a fun hobby but don't plan on it being inexpensive for long.  I think many used tools can be good deals though but I am leery of a few used items (plasma cutter being one).

Here is a pic of the in-progress bracket for the sleeve hitch.  I cut some 1/4" angle iron, welded it together and drilled the top and bottom holes for the pin.  You can see the 1 of the brackets I used to clamp the work piece to the drill press.
 Here is the bracket test fitted to the sleeve hitch.  Next I will weld an extension and a vertical piece for bolting the furrow head to.


Here is the end result attached to the mower ;

 This is the test run; not bad.  I don' think the picture is quite as easy to tell how well it worked. 

A very good learning experience.  If I did it again I would extend it another 6" or so.  A minor issues though is that in the up position, it is so close to the ground that it can make contact as you hit bumps.  I would love to convert to a linear actuator mechanism instead of the manual lever/arm; or maybe make an extension to the manual lever to make it easier to use while driving/steering.

Anyways, hope this was entertaining and/or useful to someone.

God Bless,
Scott

Wednesday, March 5, 2014

Research for home shop: Iron Workers, Presses, Mills and Welders

My general list of brands of mills/presses/iron workers  and research info is currently at:

https://docs.google.com/document/d/1WApJOZUBsJ_a8FNN6cx69BuRYD10-3Zvb_Z0Z2iWw0w/edit

I would really like to put together a nice home shop (need a little more space though).  Maybe a nice enough setup to do small jobs for $.  Could be a nice post retirement activity if retirement is ever possible.

Other than the space issue, it is somewhat hard to define what is the appropriate machine capacity for a home shop.  This is especially true without some experience with this type of equipment and a good understanding of what types of projects I may want to tackle.

Still thinking about the types of possible projects - ranging from mundane carts/storage, large rebar type trellises all the way up to aluminum greenhouse frames, etc. 

Cost is also a factor.  What features on a mill would I regret not having if I either have a desire to do lots of hobby work or decide to try and make a few dollars with it?  What features are easily added later?  What is best purchased versus self-built?  I believe I could safely construct a press but I am less sure whether I can do it cost effectively - less mechanical engineering knowledge will translate into overbuilding to stay safe.  I do think it would be a fun project though.

There is also the risk with used equipment.  Without a knowledgeable friend, it seems somewhat difficult to determine the state of used mills.  I did see a few blog posts with some good practical advice - listen to your intuition and remember a "too good deal" is likely not a deal type things.  I don't have experience tramming a mill or working with DTI equipment so I would agree with some blogs stating it would be a mistake trying to sort that out when checking out a potential mill for purchase.

An interesting reference regarding checking out a used mill.
http://www.mermac.com/freemill2.html

It may turn out to be an adventure.

The below lists are by no way complete but these are the most common sites I have looked at for much of the larger equipment I have an interest in.

Some metal working tool, equipment and accessory manufacturers:
  1. http://www.aceronline.net/acergroup/mills.htm
  2. http://www.americanmachinetools.com/milling_machines.htm
  3. http://metal.baileighindustrial.com/
  4. http://www.birminghammillingmachines.com/
  5. http://www.bpt.com/
  6. http://www.boltonhardware.com/category/bolton-tools/
  7. http://www.grizzly.com/
  8. www.harborfreight.com/
  9. http://www.jettools.com/us/en/home/ 
  10. http://kbctoolsandmachinery.com/category/show/Milling+Machines/Manual/
  11. http://www.kentusa.com/mills/
  12. http://www.lagun.com/vertical-milling-machines.php
  13. http://www.littlemachineshop.com/
  14. http://www.manford-usa.com/
  15. http://www.mscdirect.com/ 
  16. http://www.micromark.com/machine-tools.html
  17. http://www.northerntool.com/shop/tools/category_metal-fabrication
  18. http://www.proxxontools.com/store/pc/home.asp
  19. http://www.robotshop.com/en/tabletop-milling-machines.html
  20. http://www.rongfu.com/en/milling-drilling-machine.html
  21. http://www.sharp-industries.com/mills.html
  22. http://www.sherline.com/tools.htm
  23. http://www.siegind.com/products.html
  24. http://www.smithy.com/
  25. http://www.southern-tool.com/store/metalworking_mills.php
  26. http://www.taigtools.com/
  27. www.use-enco.com
  28. http://www.wells-index.com/
  29. http://tool.wttool.com/tools/Milling%20Machine
Great resources I lurk at a lot.  Internet searches on metal working and welding help end up here for me a lot.
Some sites which handle used (and new lots of the time) equipment.  I have not bought anything from any of these sites but do a lot of window shopping.